Accessories

ALUMINUM MANIFOLDS

$43.99

Rapidair Aluminum Pneumatic Compressed Air Distribution Manifold Blocks 6061 Aluminum ConstructionNPT Ports 200 psi rated   Call us for Custom Manifolds!

BRASS HEX REDUCING BUSHING

$1.41

Rapidair Brass   Pipe Thread All parts are brass except the 50710 is galvanized   Larger Side will be male Thread, Smaller size will be Female Thread

CHEMAIRE ADAPTER

$19.99

Convert the obsolete Chemaire  ABS compressed air piping system to female pipe thread to attach to any threaded system Use cleaner CH-108 and glue CH-109 We can custom build any components needed.  See 4 inch valve replacement pictured...

NPT COUPLING (FEMALE X FEMALE)

$2.50

Rapidair Brass Fittings   Brass Pipe Thread Coupling (Female x Female) or Galvanized Pipe Thread Coupling (Female x Female)

FILTER REGULATOR WITH GAUGE

$47.99

Rapidair Filter Regulator with gauge   Mounting BracketManual Water DrainOperating Pressure 175 PSI - MAXSet Pressure 0 - 150 PSI5 Micron Filter FLOW RATES:K93215-3/8-100 CFMK93216-1/2-150 CFMK93217-3/4-300 CFMK93218- 1"- 350 CFM

PIPE LABEL

$1.49

Rapidair Pipe marker label tells maintenance personnel what is inside the pipe, direction of flow and hazardous condition.Size: 1" x 7-1/2"  Compressed air pipe label Nitrogen pipe label Inert gas pipe label Argon pipe label Carbon Dioxide pipe label

RAPIDAIR SAFETY COUPLER -FEMALE - 70 CFM BODY

$17.45

Safety coupler Industrial Style, Type H 70 CFMWhen ordering mating plugs, must use 70 CFM plug Push button once to release the air, press button again to release the plugExhausts air pressure before the hose is released Eliminates hose...

AUTOMATIC TANK DRAIN

$99.99

Rapidair accessories   115 Volts1 to 45 minute cycle time1 to 10 second open blow off time1/2" NPT male inlet1/4" NPT female outletElectrical Timer Eliminates Manually Draining Air Tank

K96075 - VERTICAL PORT FILTER REGULATOR UNIT W/ GAUGE

$99.99

Rapidair Filter Regulator with gauge   3/4" NPT Ports top and bottomIncludes mounting bracketsManual water drainOperating pressure 175 PSISet pressure 0-150 PSI5 micron filterAir must enter top port and exit bottom port for this unit, it cannot be...

RAPIDAIR SAFETY COUPLER -MALE 70 CFM BODY

$17.49

Safety coupler Industrial Style, Type H 70 CFMWhen ordering mating plugs, must use 70 CFM plug  Push button once to release the air, press button again to release the plug Exhausts air pressure before the hose is...

REGULATOR ADJUSTMENT CAP

$8.99

Rapidair Filter/regulator with gauge   K215-CAP FOR 3/8" K93215 K216-218-CAP FOR 1/2" K93216, 3/4" K93217, 1" K93218, 3/4" K96075 VERTICAL  

REGULATOR BOWL

$8.99

Rapidair Filter/regulator with Gauge   K215-BOWL FOR 3/8" K93215 K216-218-BOWL FOR 1/2" K93216, 3/4" K93217, 1" K93218, 3/4" K96075 VERTICAL Bottom drain is not replaceable, it is pressed into the bowl Connection on the bottom drain is 5/16" tubing...

REGULATOR GAUGE

$9.99

Rapidair Filter/regulator with Gauge   REPLACEMENT GAUGE FOR: K93215K93216K93217K93218K96075

REGULATOR PLUNGER DIAPHRAGM

$8.99

Rapidair Filter/regulator with Gauge    INNER PLUNGER DIAPHRAGM K215-PLUNGER FOR 3/8" K93215 K216-218 PLUNGER FOR 1/2" K93216, 3/4" K93217, 1" K93218, 3/4" K96075 VERTICAL

REPLACEMENT FILTER

$5.28

Rapidair Filter/regulator with Gauge   Replacement filters for Rapidair Filter Regulators 5 micron K216-217 - FILTER ONLY FOR 1/2" K93216 AND 3/4"K93217 AND 3/4" K96075 VERTICAL

STAINLESS BRAIDED JUMPER HOSE

$105.99

Braided Stainless Steel Compressor Jumper Hose/Line   One end rigid male NPT, one end swivel female NPT 200 psi rated

AIR HOSE

$29.99

Rapidair Accessories   Both ends 1/4" Rigid Male NPTTekton Rubber Air Hose250 PSIWith bend restrictorsMade in the USA

FILTER REGULATOR LUBRICATOR

$69.99

Rapidair Accessories, Filter/regulator/lubricator   Mounting BracketManual Water DrainOperating Pressure 175 PSI - MAXSet Pressure 0 - 150 psi5 Micron filter

INLINE REGULATOR WITH GAUGE

$27.99

Rapidair Accessories Mounting BracketOperating Pressure 175 PSI - MAXSet Pressure 0 - 150 PSI Can be installed Vertically or Horizontally, Flow can be switched if needed

PUSH-ON AIR HOSE AND FITTINGS

$1.89

Rapidair Accessories, Rapidair Push on Hose and Fittings   Build your own push-on rubber air hose with a variety of fitting ends, hook up machines, do drop lines etc No clamps needed, simply place the end of the hose in boiling water to soften...

FILTER UNIT ONLY

$21.99

Rapidair Accessories   Inline filter units only, no regulator built inComes with mounting bracketMax PSI 1755 micron filter 

PUSH TO CONNECT COUPLER - 1/4" NPT FEMALE - 30 CFM BODY

$6.99

Push To Connect, Brass,  Industrial Style, Type M 30 CFMWhen ordering mating plugs, must use 30 CFM plug Push to connect style coupler allows the male plug to be seated without "pulling back" the sleeveSimply push the male plug into the...

PUSH TO CONNECT COUPLER - MALE - 30 CFM BODY

$6.99

Push To Connect, Brass,  Industrial Style, Type M 30 CFM When ordering mating plugs, must use 30 CFM plug Push to connect style coupler allows the male plug to be seated without "pulling back" the sleeve Simply push the male plug into the...

VIBRATION PADS

$19.99

Rapidair Accessories   Put between compressor and floorSize - 4" x 4" x 1/2" thickPack of 4

LUBRICATOR

$34.99

Rapidair Accessories   Mounting BracketUse standard air tool lightweight oilWe do not recommend using a lubricator at the start of the air system. Oil will accumulate in the lines, making them useless for painting or even blowing off dust...

PLUG - FEMALE - 70 CFM BODY

$2.95

  Rapidair Push Button Safety Quick Disconnect Coupler, Rapidair Accessories   Industrial Style, Type H 70 CFMWhen ordering couplers, must use 70 CFM coupler Heat Treated Steel, Zinc Plated   

STRAIN RELIEF

$9.98

Rapidair Strain Relief, Buss Strain relief   When hanging air hose from the ceiling, the hose needs to be attached to the building structure with a strain relief. 3/8 HOSE STRAIN RELIEF, FOR HOSE DIAM .50 - .70  MOUNTING HOLE IS 3/8 1/2 HOSE...

PLUG - MALE - 70 CFM BODY

$2.99

  Rapidair Plug for Quick Disconnect Couplers, Rapidair Accessories     Industrial Style, Type H 70 CFM When ordering couplers, must use 70 CFM coupler Heat Treated Steel, Zinc Plated